Risers are boards installed on the ends to cover the vertical spaces between the treads. Risers are often made of 1-by material, fascia board or decking. A stair tread is the width (or depth) of a single stair run. A stair rise is the vertical distance from the top of one tread to the top of the next tread.
Shop our selection of Outdoor Stair Risers & Treads in the Lumber & Composites Department at The Home Depot.
2Ã—6 for securing the stairs to the deck (Photo 8). You'll also need two 2x6s for each tread and a 1Ã—8 for each riser. Use 3-in. deck screws to fasten the skirts and
Screws are less likely to withdraw from the rim joist or header over time. Stair treads must have a nose projection of between 3/4 inch and 1 1/4 inches beyond the riser face when the tread cuts are less than 11 inches deep. (Stairs with open risers are exempt from the overhang requirement.)
They rest on a solid foundation and are attached to the deck with hangers. They have risers (also called toe kicks), treads and railings. The stairs should be at .
If the stair width is 36â€, cut treads 38â€. Push one tread against the back of the stringer, center, and fasten with two 3â€ galvanized deck screws per side. Leave 1/
When building stairs or steps for a deck: Make sure all of the step risers are the same height, and all the step.